Active Community : All Content - General Discussion

Convert AVC-Intra MXF from Panasonic AG-HPX500 to AIC MOV for iMovie Editing on Mac

guest — Wed, 19 Jun 2013 15:53:41 GMT

The Panasonic AG-HPX500 is the first high definition ENG camcorder to feature P2 (professional plug-in) capability. P2 was developed as a recording system for professionals and is widely used amongst broadcasters and independent videographers. Borrowing technology from the highly acclaimed AG-SDX900, the AG-HPX500′s advanced 2/3″ progressive CCDs provide the kind of high sensitivity not available in comparably cameras.The AG-HPX500 digital signal processor uses 14-bit A/D conversion and 19-bit inner processing to attain unprecedented accuracy. While camera does not record 1080/60p, it is from this capture that all other signals are made, which includes both 1080/24p and 1080/30p. Thanks to a low compression ratio at a bit rate of 100 Mbps (1080/59.94i, 720/59.94p) along with the easy-to-edit intraframe compression system, DVCPRO HD is suitable for recording fast-moving subjects with no motion artifacts whatsoever, making it ideal for slow-motion capture.

After make some footage on the Panasonic AG-HPX500, you may want to edit them in iMovie 6/8/9/11. However, you may also face the problem that iMovie 6/8/9/11 does not recognize the P2 AVC-Intra MXF .mxf videos.To make it easier for editing Panasonic AG-HPX500 P2 AVC-Intra MXF videos on iMovie 6/8/9/11, you can use UFUSoft P2 MXF Video Converter for Mac, which was a great Mac Panasonic AG-HPX500 MXF Converter. It can not only convert Panasonic AG-HPX500 P2 MXF .mxf videos to AIC MOV for iMovie, but also make iteasy for merge videos.

Below is the simple step-by-step guide for camcorder and camera users about how to keep and maintain 1080/50 mbps or 100 mbps from Panasonic AG-HPX500 to Apple Intermediate Codec MOV or HD MOV for iMovie 6/8/9/11 on iMac/MacBook Pro/MacBook Air with Mac OS X like Tiger, Leopard, Snow Leopard, Lion, Mountain Lion, Mavericks.

Step 1. Add Panasonic AG-HPX500 P2 MXF videos to UFUSoft P2 MXF Converter for Mac.

Connect your MXF Camcorder to iMac with USB 2.0 cable or use card reader to transfer the .mxf files to Apple hard drive disk. Run UFUSOft MXF Converter for Mac as the best Mac P2 MXF to iMovie Converter and click the “Add” button to load .mxf videos. This Panasonic AG-HPX500 P2 MXF Video Convetrer can convert Panasonic AVC-Intra 50/100 mxf export lossless compression video/audio compatible with iMovie 6/8/9/11 on Mac.

Step 2. Choose MOV with Apple Intermediate Code AIC for iMovie 6/8/9/11.

Click the “Format” option and choose iMovie and Final Cut Express > Apple InterMediate Codec (AIC) as output format with high quality for iMovie 6/8/9/11. To get 1080 videos, we need to click the “Settings” button and choose 1920*1080 as output video size. You also can choose HD Video > H.264 HD Video(*.mov).

Step3. Merge Panasonic AG-HPX500 P2 AVC-Intra MXF files. (Optional)

Select the files in the filelist and click Merge, and the Mac Panasonic AG-HPX500 P2 MXF Video Converter will join and combine the video clips into a single file as output.

Step4. Convert Panasonic AG-HPX500 P2 MXF to AIC MOV for iMovie 6/8/9/11.

Click the convert button under the preview window, the Mac MXF Video converter starts converting Panasonic AG-HPX500 AVC-Intra MXF videos to AIC MOV, and joining the P2 MXF files for editing in iMovie 6/8/9/11.

After converting and merging the Panasonic P2 AVC-Intra MXF files, just import the output Apple Intermediate Codec .mov files to iMovie 6, iMovie 8, iMovie 9, or iMovie 11 for editing and the video .Optimize your workflow and save time with the AIC compression for iMovie 6/8/9/11. You can also import the output videos to Final Cut Pro 6/7, Final Cut Express (FCE) 4 for editing in full HD.

Tips:

If you would like to edit Panasonic P2 AVC-Intra 50/100 MXF with FCE/FCP, Avid, etc, you can convert Panasonic P2 MXF to Mac itself bring format like Apple ProRes 422, DV PAL/NTSC, DVCPRO NTSC/PAL, DVCPRO50 PAL/NTSC (*.MOV) for FCE and FCP, or transcode Panasonic AVC-Intra MXF to Avid DNxHD (*.mov) for Avid on Mac.

Convert Sony XAVC to QuickTime (mov) files for Mac for Playing or Editing

guest — Wed, 19 Jun 2013 15:50:17 GMT

For Sony PMW-F55/Sony PMW-F5 camera owners, most of them have a headache of the video format their cameras produced, it produces XAVC files which are not compatible with QuickTime. So how to convert Sony XAVC to QuickTime (mov) files for Mac?

The tutorial will show you the fastest and easiest solution to convert XAVC to mov via UFUSoft XAVC Converter for Mac. It is an all-in-one XAVC converter tool specially designed to convert Sony XAVC to avi, wmv, mpg, mov, vob, mpeg, flv, f4v, 3gp, mp4, etc with excellent quality and super fast conversion speed. The following is the detailed steps of converting xavc to mov with the program.

Step 1: Click “Add” to import your Sony PMW-F55/Sony PMW-F5 XAVC files

Click “Add” to import your XAVC files. The UFUSoft XAVC Converter for Mac supports adding multiple files.

Step 2: Choose MOV as output format and specify destination folder

There are actually various output formats you can choose from. In this case, you can simply select mov format under “General Video” catalogue from “Format” drop-down list.

After you choose mov output format, you can specify your destination folder for your converted mov files if necessary.

Step 3: Edit your Sony PMW-F55/Sony PMW-F5 XAVC videos

Click Edit to edit your XAVC files by cropping, trimming, adding watermarks (text, video or image)/effects, replacing audio, removing interlaces and video noises and so on.

Step 4: Click “Convert” to start XAVC to mov conversion

Click to convert XAVC files to QuickTime mov files automatically. If you would like to merge the variable XAVC files into one output QuickTime mov file, please select all XAVC files and click Merge before you click the “Convert” button.

Best Sony XDCAM MXF Converter-PDZ-VX10 XDCAM MXF editing with FCP 6/7

guest — Tue, 18 Jun 2013 09:05:41 GMT

Best Sony XDCAM MXF Converter-PDZ-VX10 XDCAM MXF editing with FCP 6/7

Surprising!!! To celebrate Father's Day with you, Pavtube is offering up to 30% OFF discount at 2013 Father's Day Biggest Promotion. Like us on our facebook page to get it Now! And don't forget to tell your friends about it! Expires on June 23, 2013. Time-limited! Never Miss!!!

Sony PDZ-VX10 is one of Sony XDCAM series, the high-end professional camcorders which cam capture stunning-quality HD images; it can offer very high HD footages at a data rate of up to 50 Mbps at MXF format. But it becomes a pain if you want to edit the video recorded, because the high quality MXF files do not work with traditional nonlinear editing program natively on mac. You may really not feel good if you cannot edit the raw Sony XACAM MXF files in iMovie/FCP/Avid/Adobe Premiere Pro directly. Is there any way to import Sony PDZ-VX10 XDCAM MXF to FCP 6/7 efficiently without Log and Transfer?

Rejoice, Mac users, rejoice. For that finally there's a program can handle this within a few clicks, it does exactly as it claim for. Come and meet this Sony XDCAM MXF to FCP Converter for Mac which would be a vital part of your workflow.

No rendering, no stuttering, you just need to load your Sony PDZ-VX10 XDCAM MXF videos to the professional Pavtube Sony XDCAM MXF Converter for Mac software, choose FCP friendly format and click big red circle to get the fresh hot videos that can work in FCP 6/7 smoothly.

Now get this Sony XDCAM MXF Converter for Mac installed and let's go ahead to this fantastic workflow.

How to Convert Sony PDZ-VX10 XDCAM MXF to Apple ProRes for importing to FCP 6/7 without L&T?

At first, you should get your MXF video backup on your Mac. Connect your Sony PDZ-VX10 Camcorder to Mac with USB cable or use card reader to transfer the MXF files to Apple hard drive disk; do not forget to keep your camcorder on.

Run the Pavtube Mac Sony XDCAM MXF Converter for Mac. Then you can click "Add video" to load the MXF file into it, or click "Add from folder" to load the entire folder.

After that, you can select FCP 6 or 7 compatible codec. Click the "Format" bar, you will find various video formats sorted by different programs / devices. For FCP 6/7 users, the "Final Cut Pro > Apple ProRes 422 (*.mov)" preset can work well for you. If you want to get better video quality, it's recommended to choose "Apple ProRes 422 HQ".

If you want to do some editing like trim a certain MXF segment file to smaller ones, get rid of black edges of source file, add video effects, etc. this Sony XDCAM MXF Converter for Mac will be do these.

When the setting is finished, you can click the big red button to start converting Sony PDZ-VX10 XDCAM MXF to ProRes 422 for FCP 6/7. Wait for a while to get the converted Apple ProRes 422 MOV video.

After conversion you can click the "Open" button to locate the converted files and load the ProRes MOV files to FCP X. Now you are able to import/edit Sony XDCAM MXF in FCP 6/7freely without any rendering.

Open up Final Cut Pro 6/7, choose "File > Import > Files…" to select and load the generated ProRes 422 MOV files to FCP for editing use.

Tips:

Get more step-by-step guide of how to work with Sony footages, MXF videos on mac and Final Cut Pro.

MXF related guides:

Edit PDW-700 XDCAM MXF in Movie Studio Platinum Suite 12

Work Natively with Sony PDW-700 XDCAM HD MXF in FCP X

How to Import XDCAM into FCP X without using any plugin

Convert Sony XDCAM MXF files for iMovie 11

Transfer Sony XDCAM footage to QuickTime MOV on Mac

Transcode Sony PMW-350K MXF to ProRes for FCP X without rendering

Ingest Sony F65 MXF to Avid Media Composer

Two Ways to Import Canon XF100 MXF to Premiere Pro CS6

Never miss to get 20% off iMedia Converter for Mac, Video Converter Ultimate and 30% off Blu-ray Ripper and DVD Ripper at 2013 Father's Day Special Offer!

Source: Convert PDZ-VX10 XDCAM MXF for editing with FCP 6/7

How to Import/Convert Panasonic P2 MXF to iMovie MOV on Mac Mavericks/Mountain Lion

guest — Mon, 17 Jun 2013 13:35:58 GMT

Panasonic P2 camcorder is a professional HD camcorder that record high quality videos, if you loving photographing, this camcorder is definitely a good choice for you to capture vivid personal films.

As is known to us, Panasonic P2 camcorder records videos at MXF format which is not compatible with most Mac players or editing softwares even the powerful iMovie. So, what if you want to import Panasonic P2 MXF to iMovie MOV for edit MXF in iMovie? Here is the solution, you just need a UFUSoft MXF Converter for Mac to help you.

UFUSoft MXF Converter for Mac can offer an easy solution to convert and import Panasonic P2 MXF to iMovie MOV without quality loss, with it, you can fast convert the MXF files to iMovie supported MOV ones then import them to iMovie. Besides, this UFUSoft MXF Converter Mac enables you to convert other camcorders such as HVX200, HPX170 MXF to iMovie easily as well. For detailed solution, please follow the concise guide below.

Guide on How to Import/Convert/Edit Panasonic P2 MXF to MOV iMovie

1. Get started

Just run the UFUSoft MXF converter for Mac, the interface below will pop up.

2. Load Panasonic P2 MXF files.

Hit Add File button to import Panasonic P2 MXF files. Then click the drop-down list of Profile to select MOV as output format, click the Destination options to set output path to save the converted video files.

3. Setting

Hit Settings to set audio and video parameters.

4. Convert MXF to iMovie

After finish settings, click Convert button to convert Panasonic P2 MXF to MOV for iMovie . After finish converting, you can import the converted video files to iMovie for further editing then.

Tip: If you want to edit Panasonic P2 MXF in Widows Movie Maker, you can turn to MXF to Windows Movie Maker Converter for help.

Tags: convert Panasonic P2 mxf to mov imovie, edit Panasonic P2 mxf to mov imovie, import Panasonic P2 mxf to mov imovie, mxf to imovie, p2 mxf to imovie 8/9/11.

Convert Canon XF MXF, Sony EX MXF, Panasonic P2 MXF Files to Magix Movie EditPro

guest — Mon, 17 Jun 2013 13:33:43 GMT

Magix Movie EditPro is a good nonlinear video editing software for Windows users, which offers powerful video editing functions to edit multiple kinds of video files like AVI, DV-AVI, MPEG-1, MPEG-2, HDV, MPEG-4, MXV, MKV, MJPEG, QuickTime, WMV(HD), VOB.

However, we don’t see its support for MXF files. If you shoot some MXF videos from your Panasonic P2, Canon XF or Sony XDCAM camcorders and want to edit them in Magix Movie EditPro, then, you may have to transcode MXF files to Magix Movie EditPro compatible file formats.

UFUSoft MXF to Magix Movie EditPro Converter is a versatile yet powerful program that can be work with all kinds of MXF files from either Panasonic P2 camcorder, Canon XF camcorder or Sony XDCAM camcorder that can convert MXF files to Magix Move Edit Pro workable files for free editing.

Tips: If you need to edit MXF files in iMovie, FCP or other video editing program on Mac, you can try UFUSoft MXF Converter for Mac

Simple Steps to convert MXF to Magix Movie EditPro

1. Load MXF files

Download and install UFUSoft MXF to Magix Movie EditPro Converter to pop up a main interface, click Add File to import your desired MXF files

2. Select output format and directory

Click the drop-down list of “Convert To”, where you can choose “General Video”-> “AVI(RawVideo)(*.avi)”, Then, click the drop-down list of “Save To” to select a directory to save your converted files

3. Convert MXF to Magix Movie Edit Pro

Click Convert to transcode MXF to AVI, MPG or MKV etc for Magix Movie EditPro

Tags: canon mxf to magix movie editpro, convert mxf to magix movie editpro, edit mxf in magix movie editpro, import mxf to magix movie editpro, mxf to magix movie editpro, p2 mxf to magix movie editpro, transcode mxf to magix movie editpro, transfer mxf to magix movie editpro.

Ingest Panasonic AJ-HPX3700 P2 Mxf To Imovie on Mac OS X Mavericks/Mountain Lion/Lion

guest — Sun, 16 Jun 2013 14:46:40 GMT

When you back up footage shot on a P2 card on Panasonic’s DVCPRO to your PC, everything else from the card backed up fine except all these MXF files. If you are using Sony Vegas Pro to perform further editing, you will find Sony Vegas Pro does not work well with the Panasonic DVCPRO P2 MXF videos. How to import Panasonic P2 MXF to Sony Vegas for editing? Sony Vegas deals very well with WMV files, but how to convert these damned P2 MXF files to WMV for Sony Vegas?

If you have any problem like not import mxf, the video is squeezed or without the right aspect ratio, you may follow the guide below about how to convert and import P2 MXF to WMV/MOV/MPG in Sony Vegas.

1. Add Panasonic DVCPRO MXF videos to UFUSoft DVCPRO P2 MXF Video Converter.

Download UFUSoft P2 MXF Video Converter, launch the app and load MXF files into the program. You can simply drag and drop files into the converter or click “Add” to browse for your MXF files.

2.Choose WMV/MPG/MOV for Sony Vegas.

Choose output format for Sony Vegas. Click the “Format” option and choose Adobe Premiere/Sony Vegas > WMV(VC-1)(*.wmv) or MPEG-2(*.mpg) as output format. If you look for a HD output, you can follow “Format” > “HD Video” and choose the HD format you prefer. Have a try with H.264 HD Video (*.mp4), and you will be impressed by its output quality.

With the default profile, you will keep the original video resolution and audio for editing in Sony Vegas Movie Studio HD.

3. Merge Panasonic DVCPRO P2 MXF files. (Optional)

Join P2 MXF files and convert. The function of joining/merging multiple MXF files together into one single file. It’s indeed very useful function when you have plenty of MXF clips that needed to be combined to edit in Sony Vegas. If you want to join your imported files together, you only need to select all files and Click Merge. After that, you can start the P2 MXF to Sony Vegas (*.WMV) now.

Step 4. Convert Panasonic P2 MXF for Sony Vegas.

Click the convert button under the preview window, and the Panasonic P2 MXF Video Converter will start converting WMV for Sony Vegas.

After the conversion, import the wmv videos to Sony Vegas and adjust the Project Properties of the video file.

Tips:

1. If you are using other non-linear editing software instead of Sony Vegas Pro, you may also use the Panasonic P2 MXF Video converter to make the P2 MXF videos compatible with Windows Movie Maker, Adobe Premiere Elements, Adobe Premiere Pro, Adobe After Effects, Magix Movie Editor Pro, Avid Media Composer, Avid Xpress Pro, etc.

2. The UFUSoft P2 MXF Converter supports all Panasoinc DVCPRO camcorders like Panasonic AJ-HPM100, Panasonic AJ-HPM200, Panasonic AG-HPX250, Panasonic AG-HPX370, Panasonic AG-HVX200, Panasonic AG-HPX170, Panasonic AG-HPX500, Panasonic AG-HPX300, Panasonic AJ-HPX3700 (VariCam 3700), Panasonic AJ-HPX3000, Panasonic AJ-HPX2000, Panasonic AJ-HPX2700 Camcorder (VariCam 2700),etc.

Tags: convert p2 mxf to wmv for sony vegas, Edit Panasonic DVCPRO P2 MXF Files to Sony Vegas, mxf to sony vegas converter, P2 MXF to Sony Vegas Converter, Panasonic DVCPRO P2 MXF Files to MPG, Panasonic DVCPRO P2 MXF Files to WMV

MXF to Sony Vegas Pro-Transcode/Import Panasonic DVCPRO P2 MXF files to Sony Vegas Pro

guest — Sun, 16 Jun 2013 14:39:17 GMT

1. Add Panasonic DVCPRO MXF videos to UFUSoft DVCPRO P2 MXF Video Converter.

Download UFUSoft P2 MXF Video Converter, launch the app and load MXF files into the program. You can simply drag and drop files into the converter or click “Add” to browse for your MXF files.

2.Choose WMV/MPG/MOV for Sony Vegas.

With the default profile, you will keep the original video resolution and audio for editing in Sony Vegas Movie Studio HD.

Step 4. Convert Panasonic P2 MXF for Sony Vegas.

Click the convert button under the preview window, and the Panasonic P2 MXF Video Converter will start converting WMV for Sony Vegas.

After the conversion, import the wmv videos to Sony Vegas and adjust the Project Properties of the video file.

Tips:

Best Way to Convert Nikon 1 J3 MOV to H.264 MOV for Avid Media Composer Editing on Mac

guest — Sun, 16 Jun 2013 14:34:15 GMT

Nikon 1 J3 is a compact, CX-format interchangeable lens digital camera with a 14.2 MP CMOS image sensor. It features a 3.0? LCD display, can snap photos while recording movies in Full HD (1080p), 15 FPS continuous burst shooting, RAW file recording, Best Moment Capture, Motion Snapshot, Smart Photo Selector and superb low-light performance. Includes the 1 NIKKOR VR II 10-30mm f/3.5-5.6 Lens and 1 NIKKOR VR II 30-110mm f/3.8-5.6 Lens. The Nikon 1 J3 captures stills in JPEG and RAW and video in the MOV format, with H.264/MPEG-4 compression.

But this MOV video format came from Nikon 1 J3 is a long GOP format that is highly compressed, it is not a good editing format. So you may have the difficulty of playing and editing Nikon MOV video files on some players and editing software on Mac. If you want to transfer Nikon 1 J3 MOV video to Avid Media Composer edit with high quality on Mac, you can convert Nikon 1 J3 MOV files to Avid Media Composer MOV before editing.

Here is how I import Nikon 1 J3 MOV videos to Avid Media Composer by converting Nikon MOV to HD MOV on iMac/MacBook Pro with Mac OS X like Tiger, Leopard, Snow Leopard, Lion, Mountain Lion and PowerPC Mac.

Step 1. Load mov videos to Nikon Video Converter for Mac.

Connect Nikon 1 J3 to Apple iMac with the in-box USB cable, copy and transfer the 1080p .mov files to the Apple hard drive disk. Run Nikon Video Converter for Mac from Firstarsoft as the best Nikon 1 J3 to Avid video converter on Mac, and click the “Add” button to load .mov videos. You may also directly drag and drop the MOV video to application UI for importing files.

Step 2. Choose HD MOV for Avid.

Click the “Format” option, and choose HD Video > H.264 HD Video(*.mov), and the Nikon MOV to Avid converter will transcode the Nikon Full HD 1080P files to HD MOV for Avid MC, Xpress Pro.To get high quality video, you can click the “Settings” button and make sure the original option is used for the Bit rate option.

Step 3. Convert Nikon 1 J3 MOV video to HD MOV for Avid editing software.

Click the convert button under the preview window, and the Mac Nikon MOV to Avid Converter will start the conversion from Nikon 1 J3 MOV to Avid compatible MOV for Avid MC or Xpress Pro or the upgraded Media Composer 5/6.

As soon as the conversion in finished, you can import .mov videos to Avid Media Composer, Avid Xpress Pro for editing. The output HD MOV also works in Final Cut Pro and Final Cut Express/ iMovie, and other non-linear editing software like Adobe Premiere on Mac OS X.

Tips:

The Best Nikon Video Converter for Mac also supports converting Nikon D7100, Nikon D7000, Nikon D5100, Nikon D5200, Nikon D3100, Nikon D800, Nikon D600, Nikon 1 J2, Nikon 1 J1, Nikon 1 V1, Nikon D3200, Nikon D3S, Nikon D4, Nikon 1 V2, MOV videos to ProRes MOV, H.264 MOV, MPG, DV, AVI, etc on Mac for Final Cut Pro 6/7, FCP X, Final Cut Express 4, iMovie 8/9/11, Avid, Adobe Premiere Pro, etc.

Tags:convert nikon 1 J3 mov to avid media composer 6, convert Nikon 1 J3 mov to H.264 MOV, convert nikon 1 J3 to avid 5/6, edit Nikon 1 J3 MOV videos on mac, Nikon 1 J3 1080p MOV to avid, nikon 1 J3 mov to avid 6 on mac, Nikon 1 J3 MOV to mac converter, Nikon 1 J3 video converter for mac.

Nikon MOV Adobe Premiere Pro Importing Tips: Transcode Nikon 1 S1 1080p MOV Files

guest — Sun, 16 Jun 2013 14:10:34 GMT

Ultra portable and simple to operate, the The Nikon 1 S1 is ready to take with you anywhere. The advanced CMOS sensor captures exceptionally sharp images in a variety of conditions, while stunning Full HD home videos are just a button-press away. As if that wasn’t enough, the 1 S1 also accepts a whole family of NIKKOR lenses for ultimate creativity. The included 11-27.5mm lens even gives you the versatility to shoot anything from wide-angle landscapes to detailed portraits straight out of the box. But this MOV video format came from Nikon DSLR 1 S1 is a long GOP format that is highly compressed, it is not a good editing format. So you will not playback or edit smoothly the highly compressed MOV on your editing software,like: Adobe Premiere Pro, Sony Vegas , Windows Moive Maker.etc

To help Nikon 1 S1 owners get rid of this trouble, I will show you the easiest and quickest way to convert Nikon 1 S1 MOV files to WMV for Adobe Premiere.

Step 1. Load H.264 MOV files into UFUSoft Nikon 1 S1 Video Converter.

Drag and drop specified MOV files from hard drive to Nikon DSLR 1 S1 Video Converter from UFUSoft or click “Add” button on the menu bar to import video recordings. Batch video files are allowed to load, joining several video files into big one can be realized by just selecting all the files in the filelist and then click “Merge”.

Step 2.Choose Adobe Premiere Pro WMV/MPG as output format.

Click “Format” option and choose HD Video -> HD WMV Video (*.mov) , MPG as the out put format. With this option, the output video will be kept as high definition 1920×1080.

Step 3. Set video and audio parameters to get high quality of output file.

Click “Settings” button and you are allowed to custom several parameters. I suggest that you should set size, bitrate and frame rate exactly the same as the original video recordings. In this way, you will suffer the least loss of video quality.

Step 4. Start the conversion from Nikon DSLR 1 S1 MOV to WMV/MPG for Adobe Premiere Pro.

Hit the “Convert” button under the preview button and this Windows Nikon 1 S1 MOV Converter will start this conversion immediately.

After a while the .wmv , .mpg, file will be ready in the output folder. Just run Adobe Premiere and import the .wmv/.mpg file for video editing.The output videos are compatible with other editing software like Windows Movie Marker, Kdenlive, Adobe Premiere Pro, Adobe After Effects and Roxio Toast.etc.

Tips:

1. The Best UFUSoft Nikon DSLR Video Converter also supports converting Nikon 7000, Nikon D5100, Nikon D3100, Nikon D800, Nikon 1 J2, Nikon 1 J1, Nikon 1 V1, Nikon D3200, Nikon D3S, Nikon D600, Nikon 4, Nikon 1 V2, etc MOV videos to WMV, MP4, AVI, MPG, etc on Windows.

2. If you are Mac users, you can convert Nikon 1 S1 MOV files to other editable and playable video formats, like ProRes 422 MOV, H.264 MOV for iMovie and Final Cut Studio(Final Cut Pro, Final Cut express), MPG for Magix Movie Edit Pro, MOV for Adobe Premiere and ect, with the help of Nikon 1 S1 MOV Converter for Mac.

Transfer Canon Vixia HF R21 1080i AVCHD footages to iMovie AIC(*.mov) for editing Mac

guest — Tue, 04 Dec 2012 05:05:46 GMT

As a Canon Vixia HF R21 user, we always met troubles in transferring Canon HF R21 AVCHD to iMovie editing as the different codecs between Canon R21 and iMovie. The codec of recordings from Canon Vixia HF R21 is MPEG-4-AVC/H.264, the AVCHD is highly compressed and not the iMovie friendly video format, but Apple Intermediate Codec(AIC) is the most compatible codec for iMovie. So if we want to edit AVCHD clips from Canon R21 in iMovie, a powerful third party conversion software is necessary.

If we have the best Canon Vixia HF R21 MTS conveter, it is easy for us to transcode MTS videos to AIC for iMovie. I used Brorsoft AVCHD to AIC for iMovie Converter, it is really a very easy-to-use tool for me.

Below is the simple steps for you to transcode Canon Vixia HF R21 AVCHD footages to iMovie without quality loss.

Step 1: Find the best Canon HF R21 MTS Converter for mac to install on your mac. Run it and transfer the 1080i footages from Canon R21 to the converter.

Step 2: Click "format" bar to choose the compatible output format for iMovie.

Click and choose "iMovie and Final Cut Express--> Apple Intermediate Codec(AIC)(*.mov)"

Step 3: You can click "settings" to customize the output parameters, adjust the resolution, bitrate as you want. Set video size as 1920*1080, video frame rate as 30fps is better (If the original recordings are 1080 50i, pls set 25fps)

Step 4: Click convert button to start converting Canon Vixia HF R21 1080i AVCHD to AIC (.MOV) for iMovie on Mac OS X.

After Canon Vixia HF R21 AVCHD 60i conversion finished , you can click “open” to find the output file to iMovie for editing easily.

Import Canon Vixia HF S10 AVCHD to Adobe Premiere Pro on Mac

Deinterlace Canon Legria HF M306 1080/50i AVCHD on Mac

Transcode Sony NEX-VG30 AVCHD to ProRes for FCP 7 editing

Canon HF R21 AVCHD MTS to iMovie AIC smoothly Importing