Skip navigation

493 Views 1 Reply Latest reply: Jan 11, 2014 2:54 AM by Applefly RSS
Violet18 Pro 194 posts since
Aug 27, 2012
Currently Being Moderated

Jun 18, 2013 2:05 AM

Best Sony XDCAM MXF Converter-PDZ-VX10 XDCAM MXF editing with FCP 6/7

Best Sony XDCAM MXF Converter-PDZ-VX10 XDCAM MXF editing with FCP 6/7


Surprising!!! To celebrate Father's Day with you, Pavtube is offering up to 30% OFF discount at 2013 Father's Day Biggest Promotion. Like us on our facebook page to get it Now! And don't forget to tell your friends about it! Expires on June 23, 2013. Time-limited! Never Miss!!!


Sony PDZ-VX10 is one of Sony XDCAM series, the high-end professional camcorders which cam capture stunning-quality HD images; it can offer very high HD footages at a data rate of up to 50 Mbps at MXF format. But it becomes a pain if you want to edit the video recorded, because the high quality MXF files do not work with traditional nonlinear editing program natively on mac. You may really not feel good if you cannot edit the raw Sony XACAM MXF files in iMovie/FCP/Avid/Adobe Premiere Pro directly. Is there any way to import Sony PDZ-VX10 XDCAM MXF to FCP 6/7 efficiently without Log and Transfer?


Rejoice, Mac users, rejoice. For that finally there's a program can handle this within a few clicks, it does exactly as it claim for. Come and meet this Sony XDCAM MXF to FCP Converter for Mac which would be a vital part of your workflow.


No rendering, no stuttering, you just need to load your Sony PDZ-VX10 XDCAM MXF videos to the professional Pavtube Sony XDCAM MXF Converter for Mac software, choose FCP friendly format and click big red circle to get the fresh hot videos that can work in FCP 6/7 smoothly.


Now get this Sony XDCAM MXF Converter for Mac installed and let's go ahead to this fantastic workflow.


How to Convert Sony PDZ-VX10 XDCAM MXF to Apple ProRes for importing to FCP 6/7 without L&T?


At first, you should get your MXF video backup on your Mac. Connect your Sony PDZ-VX10 Camcorder to Mac with USB cable or use card reader to transfer the MXF files to Apple hard drive disk; do not forget to keep your camcorder on.


Run the Pavtube Mac Sony XDCAM MXF Converter for Mac. Then you can click "Add video" to load the MXF file into it, or click "Add from folder" to load the entire folder.



After that, you can select FCP 6 or 7 compatible codec. Click the "Format" bar, you will find various video formats sorted by different programs / devices. For FCP 6/7 users, the "Final Cut Pro > Apple ProRes 422 (*.mov)" preset can work well for you. If you want to get better video quality, it's recommended to choose "Apple ProRes 422 HQ".



If you want to do some editing like trim a certain MXF segment file to smaller ones, get rid of black edges of source file, add video effects, etc. this Sony XDCAM MXF Converter for Mac will be do these.


When the setting is finished, you can click the big red button to start converting Sony PDZ-VX10 XDCAM MXF to ProRes 422 for FCP 6/7. Wait for a while to get the converted Apple ProRes 422 MOV video.


After conversion you can click the "Open" button to locate the converted files and load the ProRes MOV files to FCP X. Now you are able to import/edit Sony XDCAM MXF in FCP 6/7freely without any rendering.


Open up Final Cut Pro 6/7, choose "File > Import > Files…" to select and load the generated ProRes 422 MOV files to FCP for editing use.





Get more step-by-step guide of how to work with Sony footages, MXF videos on mac and Final Cut Pro.


MXF related guides:


Edit PDW-700 XDCAM MXF in Movie Studio Platinum Suite 12


Work Natively with Sony PDW-700 XDCAM HD MXF in FCP X


How to Import XDCAM into FCP X without using any plugin


Convert Sony XDCAM MXF files for iMovie 11


Transfer Sony XDCAM footage to QuickTime MOV on Mac


Transcode Sony PMW-350K MXF to ProRes for FCP X without rendering


Ingest Sony F65 MXF to Avid Media Composer


Two Ways to Import Canon XF100 MXF to Premiere Pro CS6


Never miss to get 20% off iMedia Converter for Mac, Video Converter Ultimate and 30% off Blu-ray Ripper and DVD Ripper at 2013 Father's Day Special Offer!



Source: Convert PDZ-VX10 XDCAM MXF for editing with FCP 6/7

  • Applefly Pro 179 posts since
    Jul 18, 2013

    Multi-track MXF Converter Review: iMixMXF vs MXF Converter for Mac

    Description: A brief review on top Multi-track MXF Converter for Mac: Pavtube iMixMXF vs Tipard MXF Converter for Mac.

    Main interface

    Pavtube iMixMXF:

    Tipad MXF Converter for Mac:


    Pavtube iMixMXF offers two icons on the top left for "add videos" and "add from folder"; Tipard MXF Converter for Mac integrates them into one, the same place on the top left.

    We load three mxf clips in different Camera models.

    Source video properties

    In Pavtube iMixMXF, we can find a bubble under the three titles. Click it to check the input video/audio properties including video/audio stream, format, resolution, frame rate, bitrate and duration.

    Tipard MXF Converter for Mac also has an icon to show source file properties as following. But it seems it didn't show all the info of audio stream. If you want to check/switch them, you'll need to click and select in "Audio Track".

    Output Presets:

    As a beginner, the output presets (or profiles) are very important to give you conversion guidance with no need to change the bitrate, framerate, size or other figures. Both Pavtube and Tipard have various presets for different devices, and NLEs. Both of them support customize outputting preset if it's needed.

    Video Edition:

    Let's move on to edit videos before conversion.

    Click the 3D icon on top of Pavtube iMixMXF, it pops up a windows to let you trim, crop, add text/image/video watermark, remove/replace audio, add subtitles and add 3D effect. Well organized.

    In Tipard MXF Converter for Mac, the Trim feature is listed separately. The rest crop, effect, edit audio and add 3D effect work the same with Pavtube iMixMXF, except the preview window is difficult to see. Besides, the Tipard MXF Converter for Mac is not able to add video watermark as the former.

    Now let do a test to convert mxf to prores on both the converters.

    Test: workflow of converting MXF to ProRes 422 for FCP X

    We test with one MXF clip from Canon XF100 with two audio tracks.

    1. We choose "Multi-track video -> Multi-track Apple Prores 422(*.mov)" in Pavtube iMixMXF and "Final Cut Pro -> Apple ProRes 422(*.mov)" in Tipard MXF Converter for Mac.

    2. Choose audio tracks in Settings.

    Pavtube iMixMXF offers settings for Video and Audio; all the audio streams are showed here. We check both the audio track as apparently we want to save all the sound we recorded. Also it offers a mix into one track option; we keep it unchecked.

    In Tipard MXF Converter for Mac main interface, we found the options for Audio Track; but there's no way to select all of them. So we just check the first stream.

    3. Start conversion.

    Click the Convert icon at nearly the same time. We can see Pavtube iMixMXF (right) shows the percentage while Tipard MXF Converter for Mac (left) doesn't, the preview window changes with the process, but it's stuttering all the time.

    4. Import to Final Cut Pro X.

    Both the two converted completes at the same time. Now click Open output folder to locate the converted video and import them into FPCX.

    We can see both the audio tracks saved separately as original in Pavtube converted video, and the timecode is kept.

    While in converted video from Tipard MXF Converter for Mac, it only includes one audio track—the first one we selected. And the original timecode is removed; it's really confusing us as we thought it's basic and should be not difficult to realize.

    All the steps done; thanks to Pavtube and Tipard for bringing us the great MXF converting programs despite that we have made a decision.


    1. During our research online, there's another MXF Converter for Mac from Pavtube but it seems to be the lite version of Pavtube iMixMXF. For users who only records one audio track, the former is recommended and it costs less than the latter Pro version. And at Christmas & 2014 New Year Specials, if you get MXF Converter for Mac, you can get MKV Converter for Mac free which can help you to edit and play mkv video on Mac with ease. Take a look now and grasp this opportunity before Dec.10, 2013! Never miss!

    Don't worry about the problem about converting MXF files. No matter you wan to select keep all the audio channels separate for output or want to mix them into one channel, the software can help to get all of them done. Go to have a try now!

    More tips for this best MXF Audio Mixer and Converter:

    Conver Canon MXF to FCP X keeping multi audio channels

    Transcode MXF to MP4 with multiple audio tracks

    Convert MXF to multi audio tracks MKV on Mac

    Mix Multi-track MXF into on track on Win and Mac

    From: Top Mac MXF Converter Review: Pavtube iMixMXF vs Tipard MXF Converter for Mac

More Like This

  • Retrieving data ...